New Fliegl SDS 380 mit 725 mm Überhang container chassis semi-trailer























If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.




















Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake
Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS!
Achsenkonfiguration: 3 axles
Custom-Made Transport Solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs
Chassis
Saddle
Container
Fine-grained steel welded construction
saddle plate with 2 replaceable kingpins
Container receptacles
1 x 20 ft in the center (or swap body container 7.15 / 7.45)
not retractable at the front
the pivot pins of the container locking mechanism in the longer version
24 tons
two-stage support jacks
single-sided operation
With anti-splash flaps according to EC standards
Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve
including drip pan
with perforated tread plates
approx. 400 mm wide
left + right between the drip tray and the longitudinal beam
4 hose racks
approx. 4500 mm long (hose box) for hose pipes
2 x DN 200 on the outside + 2 x DN 160 arranged in the center
at the rear hose box (stainless steel) 300 mm deep
splash-proof
lid (stainless steel) all around with rubber seal
with drain hole at the lowest point
then without lid on the hose pipes
1 stainless steel grounding lug at the rear on the right side of the frame
with international grounding sticker on the frame
Climbing steps at the rear right on the underrun protection
at the rear right on the outside of the main beam
tread plate approx. 260 mm long and 300 mm wide
Axles + Suspension
SAF disc brake axles
Axle/suspension laser-measured for reduced tire wear and fuel consumption
Offset axle spacing (combined transport) up to 44 tons total train weight
Braking system
2-line compressed air braking system
Color-coded line routing for easy maintenance
Spring brake parking brake
2 fail-safe coupling heads at the front
without connecting line
Nwsdasi Rixkovxl Nqek
electronic braking system with EBS socket at the front
without connecting cable
With raising and lowering valve
Vehicle - Driving stability system
Axle load detection via EBS-CAN bus signal
for display via the display in the driver's cab
truck must be prepared accordingly
no truck installation (no calibrated scale)
Wheels and tires
385/65 R22.5
manufacturer's choice
Steel rims
factory silver
Electrical system
24 volts
multi-chamber lights
yellow LED lighting on the sides
2 white position lights at the front
2 white/red side marker lights at the rear
1 x 15-pole socket at the front
without connecting cable
Operating instructions
The specified total weight is technically possible
but depending on the load
the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution)
This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"!
Country of registration / signs
Germany
Type approval according to EC 2007/46
24/7 service hotline
Prepared for single-row license plate holder
Warning sign according to ECE - 70
Acceptance according to ADR
according to 9.1.1.2 of the ADR
EX/II
EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear
not valid for substances according to UN 0